joemeek : One Q

oneQ Specifications

Input impedances: Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain: 10dB to 60dB (variable)
Common mode rejection: 70dB
Equivalent input noise: -128.5dBu (unweighted)
Distortion:0.001% (below Compressor threshold)
Frequency response: 15Hz to 70kHz (-3dB)
Maximum input before clipping: Mic: +21dBu; Line: +45dBu
Headroom before clipping: +21dBu
Compressor threshold: ∞dBu to -20dBu (variable)
Compressor ratio: 1:1 to 10:1 (variable)
Compressor attack time: 1 msec to 100 msec (adaptive)
Compressor release time: 0.1 sec to 3 sec (adaptive)
Nominal output levels: +4dBu/-10dBv
Output impedance: 100ohm
Output Level switch: 12dB attenuation
Noise Floor: -85dBu (typical, with ~40dB mic gain)
VU Meter: Analogue movement
Power supply: 115V / 230V ac mains, 50/60Hz
Power consumption: 30W
Mechanical: 482W x 88H x 220D (overall)
Weight: 3 kilos
High Pass Filter: 12dB per octave cut below 80Hz
EQ Boost & Cut: +/-15dB (zero phase-shift bell response)
LF Frequency : 80Hz/120Hz switchable
LMF Frequency : 200Hz to 2kHz variable
HMF Frequency : 1kHz to 6kHz variable
HF Frequency : 7kHz/14kHz (selectable)
EQ "Q" 0.9 (1.6 octaves